import time
import os
from datetime import datetime
try:
    import requests
    from rpi_ws281x import *
    import RPi.GPIO as GPIO
    import socket
    import threading
except ImportError:
    print('Some modules are missing. Try to install them with "pip3 install -r requirements.txt"')
    exit()

led_power = True
idle_mode = 1
global power_button_pressed
power_button_pressed = False

# LED strip configuration:
LED_COUNT      = 60      # Number of LED pixels.
LED_PIN        = 18      # GPIO pin connected to the pixels (18 uses PWM!).
#LED_PIN        = 10      # GPIO pin connected to the pixels (10 uses SPI /dev/spidev0.0).
LED_FREQ_HZ    = 800000  # LED signal frequency in hertz (usually 800khz)
LED_DMA        = 10      # DMA channel to use for generating signal (try 10)
LED_BRIGHTNESS = 255     # Set to 0 for darkest and 255 for brightest
LED_INVERT     = False   # True to invert the signal (when using NPN transistor level shift)
LED_CHANNEL    = 0       # set to '1' for GPIOs 13, 19, 41, 45 or 53

def debug_print(message: str):
    now = datetime.now()
    current_time = now.strftime("%H:%M:%S")
    print('[DEBUG]['+current_time+'] '+message)

def check_internet(url='http://www.google.com/', timeout=1):
    try:
        _ = requests.head(url, timeout=timeout)
        return True
    except requests.ConnectionError:
        return False

def wheel(pos):
    if pos < 85:
        return Color(pos * 3, 255 - pos * 3, 0)
    elif pos < 170:
        pos -= 85
        return Color(255 - pos * 3, 0, pos * 3)
    else:
        pos -= 170
        return Color(0, pos * 3, 255 - pos * 3)
 
def rainbowCycle(strip, wait_ms=5, iterations=10):
    for j in range(256*iterations):
        if power_button_pressed == True:
            break
        elif idle_mode > 1:
            break
        for i in range(strip.numPixels()):
            strip.setPixelColor(i, wheel((int(i * 256 / strip.numPixels()) + j) & 255))
        strip.show()
        time.sleep(wait_ms/1000.0)
    
def setColor(strip, color, wait_ms=10):
    for i in range(strip.numPixels()):
        strip.setPixelColor(i, color)
    strip.show()
    time.sleep(wait_ms/1000.0)

def blink(strip, color1, color2):
    for i in range(strip.numPixels()):
        strip.setPixelColor(i, color1)
    strip.show()
    time.sleep(1)
    for i in range(strip.numPixels()):
        strip.setPixelColor(i, color2)
    strip.show()
    time.sleep(1)

def change_idle_mode(channel):
    global idle_mode
    idle_mode += 1
    if idle_mode == 8:
        idle_mode = 1
    debug_print('Change Idlemode executed')

def power_toggle(channel):
    if led_power == True:
        led_power = False
        debug_print('LED Power OFF')
    else:
        led_power = True
        debug_print('LED Power ON')

def socket_listener():
    SOCKET_BIND_IP = '0.0.0.0'
    SOCKET_BIND_PORT = 5760
    with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
        s.bind((SOCKET_BIND_IP, SOCKET_BIND_PORT))
        s.listen()
        return s.accept()

if __name__ == '__main__':
    strip = Adafruit_NeoPixel(LED_COUNT, LED_PIN, LED_FREQ_HZ, LED_DMA, LED_INVERT, LED_BRIGHTNESS, LED_CHANNEL)
    strip.begin()
    GPIO.setmode(GPIO.BOARD)
    GPIO.setup(13, GPIO.IN, pull_up_down=GPIO.PUD_UP)
    GPIO.setup(19, GPIO.IN, pull_up_down=GPIO.PUD_UP)
    GPIO.add_event_detect(13, GPIO.RISING, callback=power_toggle, bouncetime=300)
    GPIO.add_event_detect(19, GPIO.RISING, callback=change_idle_mode, bouncetime=300) 

    threading.Thread(target=socket_listener).start()

    try:
        while True:
            conn, addr = socket_listener()
            socket_data = conn.recv(1024)
            print(socket_data)
            print(type(socket_data))
            if led_power == True:
                if check_internet() == False:
                    blink(strip, Color(255,0,0), Color(255,255,255))
                else:
                    if idle_mode == 1:
                        rainbowCycle(strip)
                    elif idle_mode == 2:
                        setColor(strip, Color(255,0,0))
                    elif idle_mode == 3:
                        setColor(strip, Color(0,255,0))
                    elif idle_mode == 4:
                        setColor(strip, Color(0,0,255))
                    elif idle_mode == 5:
                        setColor(strip, Color(125,245,255))
                    elif idle_mode == 6:
                        setColor(strip, Color(255,0,100))
                    elif idle_mode == 7:
                        setColor(strip, Color(0,255,255))
                    else:
                        blink(strip, Color(255,0,0), Color(0,0,0))
                    time.sleep(1)
            else:
                setColor(strip, Color(0,0,0))
                time.sleep(1)
    except KeyboardInterrupt:
        setColor(strip, Color(0,0,0))
        GPIO.cleanup()