import time
import requests
from rpi_ws281x import *
import RPi.GPIO as GPIO
import os
try:
    from flask import Flask, request
except:
    os.system('pip3 install Flask')
    os.system('sudo pip3 install Flask')
    from flask import Flask, request
import threading

# LED strip configuration:
LED_COUNT      = 60      # Number of LED pixels.
LED_PIN        = 18      # GPIO pin connected to the pixels (18 uses PWM!).
#LED_PIN        = 10      # GPIO pin connected to the pixels (10 uses SPI /dev/spidev0.0).
LED_FREQ_HZ    = 800000  # LED signal frequency in hertz (usually 800khz)
LED_DMA        = 10      # DMA channel to use for generating signal (try 10)
LED_BRIGHTNESS = 255     # Set to 0 for darkest and 255 for brightest
LED_INVERT     = False   # True to invert the signal (when using NPN transistor level shift)
LED_CHANNEL    = 0       # set to '1' for GPIOs 13, 19, 41, 45 or 53

def check_internet(url='http://www.google.com/', timeout=5):
    try:
        _ = requests.head(url, timeout=timeout)
        return True
    except requests.ConnectionError:
        return False

def wheel(pos):
    if pos < 85:
        return Color(pos * 3, 255 - pos * 3, 0)
    elif pos < 170:
        pos -= 85
        return Color(255 - pos * 3, 0, pos * 3)
    else:
        pos -= 170
        return Color(0, pos * 3, 255 - pos * 3)
 
def rainbowCycle(strip, wait_ms=5, iterations=10):
    for j in range(256*iterations):
        for i in range(strip.numPixels()):
            strip.setPixelColor(i, wheel((int(i * 256 / strip.numPixels()) + j) & 255))
        strip.show()
        time.sleep(wait_ms/1000.0)
    
def setColor(strip, color, iterations=10, wait_ms=10):
    for i in range(strip.numPixels()):
        strip.setPixelColor(i, color)
    strip.show()
    time.sleep(wait_ms/1000.0)

def blink(strip, color1, color2, iterations=10, wait_ms=10):
    for i in range(strip.numPixels()):
        strip.setPixelColor(i, color1)
    strip.show()
    time.sleep(1)
    for i in range(strip.numPixels()):
        strip.setPixelColor(i, color2)
    strip.show()
    time.sleep(1)

def change_idle_mode(channel):
    global idle_mode
    idle_mode += 1
    if idle_mode == 6:
        idle_mode = 1
    print('Change Idlemode executed')

def power_toggle(channel):
    global power_button_pressed
    power_button_pressed = 'True'
    print('Toggle Power executed')

#Web API
app = Flask(__name__)

@app.route('/')
def index():
    command = str(request.args.get('command'))
    if command == "switch-ilde-mode":
        print('Switched Idlemode via API')
        change_idle_mode
    elif command == "switch-toggle-on-off":
        print('Toggled Power via API')
        power_toggle
    
    return command

if __name__ == '__main__':
    threading.Thread(target=app.run(host="0.0.0.0", port=80, use_reloader=False)).start()

    led_power = 'True'
    idle_mode = 1
    strip = Adafruit_NeoPixel(LED_COUNT, LED_PIN, LED_FREQ_HZ, LED_DMA, LED_INVERT, LED_BRIGHTNESS, LED_CHANNEL)
    strip.begin()
    GPIO.setmode(GPIO.BOARD)
    GPIO.setup(13, GPIO.IN, pull_up_down=GPIO.PUD_UP)
    GPIO.setup(19, GPIO.IN, pull_up_down=GPIO.PUD_UP)
    GPIO.add_event_detect(13, GPIO.RISING, callback=power_toggle, bouncetime=300)
    GPIO.add_event_detect(19, GPIO.RISING, callback=change_idle_mode, bouncetime=300) 

    try:
        while True:
            try:
                print('Button pressed: '+str(power_button_pressed))
                if str(power_button_pressed) == 'True':
                    if led_power == 'True':
                        led_power = 'False'
                        power_button_pressed = 'False'
                    else:
                        led_power = 'True'
                        power_button_pressed = 'False'
            except:
                pass

            if led_power == 'True':
                print('Power: True')
                if check_internet() == False:
                    blink(strip, Color(255,0,0), Color(255,255,255))
                else:
                    if idle_mode == 1:
                        rainbowCycle(strip)
                    elif idle_mode == 2:
                        setColor(strip, Color(255,0,0))
                    elif idle_mode == 3:
                        setColor(strip, Color(0,255,0))
                    elif idle_mode == 4:
                        setColor(strip, Color(0,0,255))
                    elif idle_mode == 5:
                        setColor(strip, Color(125,245,255))
                    else:
                        blink(strip, Color(255,0,0), Color(0,0,0))
                    time.sleep(1)
            else:
                print('Power: False')
                setColor(strip, Color(0,0,0))
                time.sleep(1)
    except KeyboardInterrupt:
        setColor(strip, Color(0,0,0))
        GPIO.cleanup()