removed debug client and added new main.py
Signed-off-by: Ebbe Baß <ebbe@ping-mee.de>master
parent
da667c9ae2
commit
b5f5be60d7
|
|
@ -1,9 +0,0 @@
|
|||
import socket
|
||||
|
||||
HOST = "172.0.0.1"
|
||||
PORT = 5760
|
||||
|
||||
with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
|
||||
s.connect((HOST, PORT))
|
||||
s.sendall(b"Hello, world")
|
||||
data = s.recv(1024)
|
||||
|
|
@ -0,0 +1,129 @@
|
|||
import time
|
||||
import os
|
||||
from datetime import datetime
|
||||
try:
|
||||
from rpi_ws281x import *
|
||||
import RPi.GPIO as GPIO
|
||||
import socket
|
||||
except ImportError:
|
||||
print('Some modules are missing. Try to install them with "pip3 install -r requirements.txt"')
|
||||
exit()
|
||||
|
||||
led_power = True
|
||||
idle_mode = 1
|
||||
global power_button_pressed
|
||||
power_button_pressed = False
|
||||
|
||||
SOCKET_BIND_IP = '0.0.0.0'
|
||||
SOCKET_BIND_PORT = 5760
|
||||
|
||||
# LED strip configuration:
|
||||
LED_COUNT = 60 # Number of LED pixels.
|
||||
LED_PIN = 18 # GPIO pin connected to the pixels (18 uses PWM!).
|
||||
#LED_PIN = 10 # GPIO pin connected to the pixels (10 uses SPI /dev/spidev0.0).
|
||||
LED_FREQ_HZ = 800000 # LED signal frequency in hertz (usually 800khz)
|
||||
LED_DMA = 10 # DMA channel to use for generating signal (try 10)
|
||||
LED_BRIGHTNESS = 255 # Set to 0 for darkest and 255 for brightest
|
||||
LED_INVERT = False # True to invert the signal (when using NPN transistor level shift)
|
||||
LED_CHANNEL = 0 # set to '1' for GPIOs 13, 19, 41, 45 or 53
|
||||
|
||||
def debug_print(message: str):
|
||||
now = datetime.now()
|
||||
current_time = now.strftime("%H:%M:%S")
|
||||
print('[DEBUG]['+current_time+'] '+message)
|
||||
|
||||
def wheel(pos):
|
||||
if pos < 85:
|
||||
return Color(pos * 3, 255 - pos * 3, 0)
|
||||
elif pos < 170:
|
||||
pos -= 85
|
||||
return Color(255 - pos * 3, 0, pos * 3)
|
||||
else:
|
||||
pos -= 170
|
||||
return Color(0, pos * 3, 255 - pos * 3)
|
||||
|
||||
def rainbowCycle(strip, wait_ms=5, iterations=10):
|
||||
for j in range(256*iterations):
|
||||
if power_button_pressed == True:
|
||||
break
|
||||
elif idle_mode > 1:
|
||||
break
|
||||
for i in range(strip.numPixels()):
|
||||
strip.setPixelColor(i, wheel((int(i * 256 / strip.numPixels()) + j) & 255))
|
||||
strip.show()
|
||||
time.sleep(wait_ms/1000.0)
|
||||
|
||||
def setColor(strip, color, wait_ms=10):
|
||||
for i in range(strip.numPixels()):
|
||||
strip.setPixelColor(i, color)
|
||||
strip.show()
|
||||
time.sleep(wait_ms/1000.0)
|
||||
|
||||
def blink(strip, color1, color2):
|
||||
for i in range(strip.numPixels()):
|
||||
strip.setPixelColor(i, color1)
|
||||
strip.show()
|
||||
time.sleep(1)
|
||||
for i in range(strip.numPixels()):
|
||||
strip.setPixelColor(i, color2)
|
||||
strip.show()
|
||||
time.sleep(1)
|
||||
|
||||
def change_idle_mode(channel):
|
||||
global idle_mode
|
||||
idle_mode += 1
|
||||
if idle_mode == 8:
|
||||
idle_mode = 1
|
||||
debug_print('Change Idlemode executed')
|
||||
|
||||
def power_toggle(channel):
|
||||
if led_power == True:
|
||||
led_power = False
|
||||
debug_print('LED Power OFF')
|
||||
else:
|
||||
led_power = True
|
||||
debug_print('LED Power ON')
|
||||
|
||||
if __name__ == '__main__':
|
||||
strip = Adafruit_NeoPixel(LED_COUNT, LED_PIN, LED_FREQ_HZ, LED_DMA, LED_INVERT, LED_BRIGHTNESS, LED_CHANNEL)
|
||||
strip.begin()
|
||||
GPIO.setmode(GPIO.BOARD)
|
||||
GPIO.setup(13, GPIO.IN, pull_up_down=GPIO.PUD_UP)
|
||||
GPIO.setup(19, GPIO.IN, pull_up_down=GPIO.PUD_UP)
|
||||
GPIO.add_event_detect(13, GPIO.RISING, callback=power_toggle, bouncetime=300)
|
||||
GPIO.add_event_detect(19, GPIO.RISING, callback=change_idle_mode, bouncetime=300)
|
||||
|
||||
# with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
|
||||
# s.bind((SOCKET_BIND_IP, SOCKET_BIND_PORT))
|
||||
# s.listen()
|
||||
# conn, addr = s.accept()
|
||||
|
||||
try:
|
||||
while True:
|
||||
# socket_data = conn.recv(1024)
|
||||
# print(socket_data)
|
||||
# print(type(socket_data))
|
||||
if led_power == True:
|
||||
if idle_mode == 1:
|
||||
rainbowCycle(strip)
|
||||
elif idle_mode == 2:
|
||||
setColor(strip, Color(255,0,0))
|
||||
elif idle_mode == 3:
|
||||
setColor(strip, Color(0,255,0))
|
||||
elif idle_mode == 4:
|
||||
setColor(strip, Color(0,0,255))
|
||||
elif idle_mode == 5:
|
||||
setColor(strip, Color(125,245,255))
|
||||
elif idle_mode == 6:
|
||||
setColor(strip, Color(255,0,100))
|
||||
elif idle_mode == 7:
|
||||
setColor(strip, Color(0,255,255))
|
||||
else:
|
||||
blink(strip, Color(255,0,0), Color(0,0,0))
|
||||
time.sleep(1)
|
||||
else:
|
||||
setColor(strip, Color(0,0,0))
|
||||
time.sleep(1)
|
||||
except KeyboardInterrupt:
|
||||
setColor(strip, Color(0,0,0))
|
||||
GPIO.cleanup()
|
||||
8
start.sh
8
start.sh
|
|
@ -1,7 +1,7 @@
|
|||
#!bin/bash -e
|
||||
#!bin/bash
|
||||
|
||||
SCRIPT_DIR="$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )"
|
||||
screen -m -d rackled
|
||||
screen -m -d rackled-ui
|
||||
sleep 5
|
||||
screen -S rackled -X stuff "cd $SCRIPT_DIR\n"
|
||||
screen -S rackled -X stuff "python3 main.py\n"
|
||||
screen -S rackled-ui -X stuff "cd $SCRIPT_DIR\n"
|
||||
screen -S rackled-ui -X stuff "python3 main.py\n"
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
import socket
|
||||
|
||||
HOST = "192.168.190.20"
|
||||
PORT = 5760
|
||||
|
||||
with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
|
||||
s.connect((HOST, PORT))
|
||||
s.sendall(b"Hello, world")
|
||||
data = s.recv(1024)
|
||||
|
||||
print(f"Received {data!r}")
|
||||
|
|
@ -1,17 +0,0 @@
|
|||
import socket
|
||||
|
||||
HOST = '0.0.0.0'
|
||||
PORT = 5760
|
||||
|
||||
with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
|
||||
s.bind((HOST, PORT))
|
||||
s.listen()
|
||||
conn, addr = s.accept()
|
||||
with conn:
|
||||
print(f"Connected by {addr}")
|
||||
while True:
|
||||
data = conn.recv(1024)
|
||||
if not data:
|
||||
break
|
||||
conn.sendall(data)
|
||||
|
||||
Loading…
Reference in New Issue