removed debug client and added new main.py

Signed-off-by: Ebbe Baß <ebbe@ping-mee.de>

debug-client.py

@@ -1,9 +0,0 @@
-import socket
-
-HOST = "172.0.0.1"
-PORT = 5760
-
-with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
-    s.connect((HOST, PORT))
-    s.sendall(b"Hello, world")
-    data = s.recv(1024)

main-old.py

@@ -0,0 +1,129 @@
+import time
+import os
+from datetime import datetime
+try:
+    from rpi_ws281x import *
+    import RPi.GPIO as GPIO
+    import socket
+except ImportError:
+    print('Some modules are missing. Try to install them with "pip3 install -r requirements.txt"')
+    exit()
+
+led_power = True
+idle_mode = 1
+global power_button_pressed
+power_button_pressed = False
+
+SOCKET_BIND_IP = '0.0.0.0'
+SOCKET_BIND_PORT = 5760
+
+# LED strip configuration:
+LED_COUNT      = 60      # Number of LED pixels.
+LED_PIN        = 18      # GPIO pin connected to the pixels (18 uses PWM!).
+#LED_PIN        = 10      # GPIO pin connected to the pixels (10 uses SPI /dev/spidev0.0).
+LED_FREQ_HZ    = 800000  # LED signal frequency in hertz (usually 800khz)
+LED_DMA        = 10      # DMA channel to use for generating signal (try 10)
+LED_BRIGHTNESS = 255     # Set to 0 for darkest and 255 for brightest
+LED_INVERT     = False   # True to invert the signal (when using NPN transistor level shift)
+LED_CHANNEL    = 0       # set to '1' for GPIOs 13, 19, 41, 45 or 53
+
+def debug_print(message: str):
+    now = datetime.now()
+    current_time = now.strftime("%H:%M:%S")
+    print('[DEBUG]['+current_time+'] '+message)
+
+def wheel(pos):
+    if pos < 85:
+        return Color(pos * 3, 255 - pos * 3, 0)
+    elif pos < 170:
+        pos -= 85
+        return Color(255 - pos * 3, 0, pos * 3)
+    else:
+        pos -= 170
+        return Color(0, pos * 3, 255 - pos * 3)
+ 
+def rainbowCycle(strip, wait_ms=5, iterations=10):
+    for j in range(256*iterations):
+        if power_button_pressed == True:
+            break
+        elif idle_mode > 1:
+            break
+        for i in range(strip.numPixels()):
+            strip.setPixelColor(i, wheel((int(i * 256 / strip.numPixels()) + j) & 255))
+        strip.show()
+        time.sleep(wait_ms/1000.0)
+    
+def setColor(strip, color, wait_ms=10):
+    for i in range(strip.numPixels()):
+        strip.setPixelColor(i, color)
+    strip.show()
+    time.sleep(wait_ms/1000.0)
+
+def blink(strip, color1, color2):
+    for i in range(strip.numPixels()):
+        strip.setPixelColor(i, color1)
+    strip.show()
+    time.sleep(1)
+    for i in range(strip.numPixels()):
+        strip.setPixelColor(i, color2)
+    strip.show()
+    time.sleep(1)
+
+def change_idle_mode(channel):
+    global idle_mode
+    idle_mode += 1
+    if idle_mode == 8:
+        idle_mode = 1
+    debug_print('Change Idlemode executed')
+
+def power_toggle(channel):
+    if led_power == True:
+        led_power = False
+        debug_print('LED Power OFF')
+    else:
+        led_power = True
+        debug_print('LED Power ON')
+
+if __name__ == '__main__':
+    strip = Adafruit_NeoPixel(LED_COUNT, LED_PIN, LED_FREQ_HZ, LED_DMA, LED_INVERT, LED_BRIGHTNESS, LED_CHANNEL)
+    strip.begin()
+    GPIO.setmode(GPIO.BOARD)
+    GPIO.setup(13, GPIO.IN, pull_up_down=GPIO.PUD_UP)
+    GPIO.setup(19, GPIO.IN, pull_up_down=GPIO.PUD_UP)
+    GPIO.add_event_detect(13, GPIO.RISING, callback=power_toggle, bouncetime=300)
+    GPIO.add_event_detect(19, GPIO.RISING, callback=change_idle_mode, bouncetime=300) 
+
+    # with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
+    #     s.bind((SOCKET_BIND_IP, SOCKET_BIND_PORT))
+    #     s.listen()
+    #     conn, addr = s.accept()
+
+    try:
+        while True:
+            # socket_data = conn.recv(1024)
+            # print(socket_data)
+            # print(type(socket_data))
+            if led_power == True:
+                if idle_mode == 1:
+                    rainbowCycle(strip)
+                elif idle_mode == 2:
+                    setColor(strip, Color(255,0,0))
+                elif idle_mode == 3:
+                    setColor(strip, Color(0,255,0))
+                elif idle_mode == 4:
+                    setColor(strip, Color(0,0,255))
+                elif idle_mode == 5:
+                    setColor(strip, Color(125,245,255))
+                elif idle_mode == 6:
+                    setColor(strip, Color(255,0,100))
+                elif idle_mode == 7:
+                    setColor(strip, Color(0,255,255))
+                else:
+                    blink(strip, Color(255,0,0), Color(0,0,0))
+                time.sleep(1)
+            else:
+                setColor(strip, Color(0,0,0))
+                time.sleep(1)
+    except KeyboardInterrupt:
+        setColor(strip, Color(0,0,0))
+        GPIO.cleanup()

start.sh

@@ -1,7 +1,7 @@
-#!bin/bash -e
+#!bin/bash
 
 SCRIPT_DIR="$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )"
-screen -m -d rackled
+screen -m -d rackled-ui
 sleep 5
-screen -S rackled -X stuff "cd $SCRIPT_DIR\n"
+screen -S rackled-ui -X stuff "cd $SCRIPT_DIR\n"
-screen -S rackled -X stuff "python3 main.py\n"
+screen -S rackled-ui -X stuff "python3 main.py\n"

test-client.py

@@ -1,11 +0,0 @@
-import socket
-
-HOST = "192.168.190.20"
-PORT = 5760
-
-with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
-    s.connect((HOST, PORT))
-    s.sendall(b"Hello, world")
-    data = s.recv(1024)
-
-print(f"Received {data!r}")

test-server.py

@@ -1,17 +0,0 @@
-import socket
-
-HOST = '0.0.0.0'
-PORT = 5760
-
-with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
-    s.bind((HOST, PORT))
-    s.listen()
-    conn, addr = s.accept()
-    with conn:
-        print(f"Connected by {addr}")
-        while True:
-            data = conn.recv(1024)
-            if not data:
-                break
-            conn.sendall(data)
-